Cable protection with conductor end sleeve A conductor end sleeve is used to create a reliable electrical connection. The copper tube of the ferrule protects the copper wires on the stripped side of a cable. Nedelko's conductor end sleeves are available in various designs so that a conductor end sleeve is available for every application.Using conductor end sleevesUsing a conductor end sleeve is relatively simple. First, you need to strip the end of the cable. Depending on the thickness of the cable, you can use a stripper or a cable peeler to do this. Push the copper wires into the ferrule until they just barely touch the other side of the ferrule and then use crimping pliers so that the ferrule fits tightly around the wires. With an insulated ferrule, do not crimp the coloured part, but the tin part. Now the ferrule is ready for use.

Cable protection with cable lug A cable lug is a connector or connection piece between a cable or a flat connection. Think of a copper conductor or a battery. Just like a ferrule, a cable lug is crimped around a cable using crimping pliers or pressing pliers. In this way, the cable lug is fitted correctly so that no short circuit is caused. Other cable protectionA ferrule or cable lug protects the end of cables from wire breakage or otherwise. To protect the cable itself, you can choose our heatshrink tubing, our protective sleeve or Elematic's insulating tape. This way, all cables are optimally protected and can last a lot longer.